Sitecom WL-350 Manual do Utilizador

Wireless Media Router WL-350 Full Manual

System Requirements The following are the minimum system requirements in order configure the device: - PC/Notebook - Operating System –

- 1 Understanding the Hardware Hardware Installation You can place the WL-350 on a desk or other flat surface, or you can mount it on a wall.

IP Address Configuration This device can be configured as a Bridge/Router or Access Point. The default IP address of the device is 19

2 Internet Connection Wizard This device offers a quick and simple configuration through the use of a wizard. This chapter describes how

Select your country from the Country list. Select your internet provider. Click Next. Depending on the chosen provider, you may need to e

3 Wi-Fi Protected Setup Wizard Wi-Fi Protected Setup is a feature that locks the wireless security settings and prevents the settings f

Add a Wireless Device Click on Basic -> Wireless and click on the Add Wireless Device Wizard button. The wireless wizard will in

60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network. There are several ways

If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on t

4 Advanced Web Configuration Logging In Open a web browser and type in the IP address (default: http://192.168.0.1), the web-browser will display

WL-350 Wireless Media Router Full Manual 2 INTRODUCTION...

4.1 Home Device All of your Internet and network connection details are displayed on this page. The firmware version is also displayed here. Wire

- Mode: The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or

- Time Out: The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on the type

Stats Click on the Statistics link in the navigation menu. This page displays the transmitted and received packet statistics of the wire

DHCP Click on the DHCP link in the navigation menu. This page displays the routing details configured for your router.  Local: The IP addre

 Time Out: The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on

4.2 BASIC Network This device can be configured as a Router or a Bridge. Select Router mode if the WAN port is connected to the

Router Mode In this mode, the device functions as a NAT router and is connected to the Internet. Select the Router Mode radio button.

Wireless These options allow you to enable/disable the wireless interface, switch between the 11n, 11b/g and 11b radio band and channel frequency.

appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed&qu

WL-350 Wireless Media Router Full Manual 3 Time Configuration ...

 WEP Key Length: Select a 64-bit or 128-bit WEP key length from the drop-down list.  WEP Key 1-4: You may enter four different WEP keys. 

 WPA Mode: Select the Auto WPA / WPA2 from the drop-down list.  Cipher Type: Select TKIP and AES as the cipher suite. The encryptio

 Cipher Type: Select TKIP or AES as the cipher suite. The encryption algorithm used to secure the data communication. o TKIP. Use

WAN The device offers several types of WAN connections in order to connect to the Internet. - Static IP Address - Dynamic IP Addres

 Subnet Mask: Specify the subnet mask for this IP address, which is assigned by your ISP.  Default Gateway: Specify the IP address of th

Dynamic IP Address (DHCP) Configuration The WAN interface can be configured as a DHCP Client in which the ISP provides the IP address to the device

devices send larger packets, the router will break them into smaller packets. Ideally, you should set this to match the MTU of the conne

PPPoE (Point-to-Point Protocol over Ethernet) The WAN interface can be configured as PPPoE. This type of connection is usually used for a DSL servi

 MTU: The Maximum Transmission Unit (MTU) is a parameter that determines the largest packet size (in bytes) that the router will send to the WAN.

PPTP (Point-to-Point Tunneling Protocol) The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling Protocol) uses a

Introduction The WL-350 is a draft 802.11n compliant device that delivers up to 6x faster speeds than 802.11g while staying backw

o Manual: You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to

Advanced Wireless This page allows you to configure the fragmentation threshold, RTS threshold, beacon period, transmit power, DTIM inte

 Fragment Threshold: Packets over the specified size will be fragmented in order to improve performance on noisy networks. Specify a

 WAN Port Speed: You may select a WAN port speed from the drop-down list. It is recommended that you select Auto.  Enable Multicas

4.3 Firewall Virtual Server The Virtual Server option gives Internet users access to services on your LAN. This feature is useful fo

Special Application An application rule is used to open single or multiple ports on your router when the router senses data sent to the

Port Forwarding Multiple connections are required by some applications, such as internet games, video conferencing, Internet telephony, and ot

Access Control The Access Control section allows you to control access in and out of devices on your network. Use this feature as Parental Co

 Specify a policy name and then click on the Next button to continue.  Select a schedule from the drop-down list: Always or Never,

Website Filter This is a type of parental control feature used to restrict certain websites form being accessed through your network. T

Features & Benefits Features Benefits High Speed Data Rate Up to 300Mbps Capable of handling heavy data payloads such as MPEG video streaming C

Schedules Click on the Schedules link in the navigation menu. Schedules can be created for use with enforcing rules. For example, if you want to res

4.4 Advanced Settings Dynamic DNS The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain n

StreamEngine The StreamEngine feature helps improve the network performance by prioritizing applications.  Enable Traffic Shaping: Place a che

 Connection Type: By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network o

MAC Address Filter This feature is used to restrict certain MAC address from accessing the Internet. These filters can be used for securing and res

Firewall Settings The device provides a tight firewall by virtue of the way NAT works. Unless you configure the router to the contrary, t

o Port And Address Restricted The NAT does not forward any incoming connection requests with the same port address as an already

or ICMP initiates a session to the Internet, the router's NAT can track such a session, even though it does not recognize the protocol. This fe

of your corporate network whether your VPN client supports NAT traversal. o RTSP: Allows applications that use Real Time Streaming

WISH WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using a wireless network

Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packin

 Enable: Place a check in this box to enable the WISH rule. A WISH Rule identifies a specific message flow and assigns a priorit

Inbound Filter When you use the Virtual Server, Port Forwarding, or Remote Administration features to open specific ports to traffic

Bandwidth Using this page, it’s possible to perform a variety of network tests between the router and other LAN devices. Choose the Test Type,

Disk This page shows information regarding the attached storage devices. File system type, total space on the device, and available space is shown i

Share On this page, the sharing mode can be changed. Choose to share all folders with all users, or to restrict the sharing of folders. Whe

Users You can add new users and configure user rights for the storage device.  Password: Enter a password for the selected user.  Share Nam

4.5 Toolbox Time Configuration Click on the Time link in the navigation menu. This feature allows you to configure, update, and maintai

you are using schedules or logs, this is the best way to ensure that the schedules and logs are kept accurate.  NTP Server Used: Sp

Load From Local Hard Drive This option allows you to restore a backup configuration from a file to the device. Click on the Browse button

Restore To Factory Default Click on the Restore all Settings to Factory Defaults button. This option restores all configuration settin

Product Layout Item Label Description 1 LAN Ports (yellow) Use an Ethernet cable to connect each port to a computer on your Local Area Network

Please wait while the system is rebooting. Note: Do no unplug the device during this process as this may cause permanent damage.

Firmware Click on the Firmware link in the navigation menu. This page allows you to upgrade the firmware of the device in order

 Enable Logging to a Syslog Server: Place a check in this box to enable Syslog logging.  Syslog Server IP Address: Specify the I

System Name Gateway Name: Name of your router. Remote Management The remote management function allows you to configure the Broadband router fro

Appendix A FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply

Back label The backlabel describes the IP address, login details, SSID, security code and WPS button functionality. Button Description WPS BUTTO

LED Definition From left to right. Port Description Power (Blue) Shows the device is turned on. USB (Blue) Shows an USB device is connected. WiFi