Sitecom WL-607 Guia de Instalação descarregar pdf (Página 38)

4.5 DMZ

If you have a local client PC that cannot run an Internet application (e.g. Games) properly from

behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access

by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN

port IP address to a particular IP address in your LAN. The difference between the virtual server

and the DMZ function is that the virtual server re-directs a particular service/Internet application

(e.g. FTP, websites) to a particular LAN client/server, whereas DMZ re-directs all packets

(regardless of services) going to your WAN IP address to a particular LAN client/server.

Parameters Description

Enable DMZ

Enable/disable DMZ

Note: If there is a conflict between the Virtual Server and the

DMZ setting, then Virtual Server function will have priority over

the DMZ function.

Host IP Address

Input the IP address of a particular host in your LAN that will

receive all the packets originally going to the WAN port/Public IP

address above

Note: You need to give your LAN PC clients a fixed/static IP

address for DMZ to work properly.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 46 47

Sem comentários

Sitecom WL-607 Guia de Instalação Página 38