Sitecom WL-357 Manual do Utilizador descarregar pdf (Página 36)

DMZ

If you have a client PC that cannot run an Internet application (e.g. Games)

properly from behind the NAT firewall, then you can open up the firewall

restrictions to unrestricted two-way Internet access by defining a DMZ Host. The

DMZ function allows you to re-direct all packets going to your WAN port IP

address to a particular IP address in your LAN. The difference between the virtual

server and the DMZ function is that the virtual server re-directs a particular

service/Internet application (e.g. FTP, websites) to a particular LAN client/server,

whereas DMZ re-directs all packets (regardless of services) going to your WAN IP

address to a particular LAN client/server.

Enable DMZ Enable/disable DMZ

Public IP Address The IP address of the WAN port or any other Public IP

addresses given to you by your ISP

Client PC IP Address Fill-in the IP address of a particular host in your LAN that

will receive all the packets originally going to the WAN port/Public IP address

above.

Click <Apply> at the bottom of the screen to save the above configurations.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 60 61

Sem comentários

Sitecom WL-357 Manual do Utilizador Página 36